Category: Support

Showing 10 out of 14 articles..

How to setup your Trunk / Carrier / Provider in ViciDial – VicidialNow – Goautodial – Vicibox

Last modified: September 29, 2015

Asterisk based dialers: VICIdial, GoAutodial, Vicibox, Vicidialnow Outgoing Configuration Parameters 1) How do I setup my SIP trunk for inbound/outbound calling? To start making and receiving calls using Switch2VoIP please verify that your Asterisk VICIdial server is configured as follows. We authenticate IP-PBX SIP Trunking traffic by: Digest Authentication (Username and SIP password) IP Authentication

Read More



Setup your CallerID on Eyebeam or X-Lite Softphone

Last modified: October 29, 2019

In this article we would like to explain how to setup the CallerID you want others to see when you call them. You can use the same concept for any softphone like Eyebeam or X-Lite and the CallerID will display perfectly. How to setup your CallerID, step by step instructions:  Within the “Account settings” tab fill in the

Read More



How to Use SIPDialer Free Auto Dialer

Last modified: July 10, 2015

Follow these easy steps to start making calls with your SIPDialer Free power Dialer. 1- Login to the SIPDialer interface using your credentials. If you still don’t have your username and password request it from your account manager. 2- Click on Admin to manage your Agents and Leads When you click on the Admin panel

Read More



SIP Trunking Configuration

Last modified: June 22, 2015

1) How do I setup my SIP trunk for inbound/outbound calling?We authenticate IP-PBX SIP Trunking traffic by: IP Authentication (IP address) or Digest Authentication (service account and PIN)After you decide which switch platform to use, you will need to establish a SIP trunk with our proxy server (sipusa.altotelecom.com port 5060) and send us your IP

Read More



A2B: Setting up a trunk in A2Billing

Last modified: June 17, 2015

USERNAME/PASSWORD BASED AUTHENTICATION If we are using username/password authentication with our provider then we need to set our trunk up manually in Asterisk. We will give that trunk a name and then use that name, instead of the IP address, in the A2Billing trunk setup screen above. Here’s an example of setting up a trunk

Read More



Asterisk SIP Trunk Configuration

Last modified: June 11, 2015

Asterisk is an open source application distributed by Digium under the GNU General Public License (GPL), Asterisk powers a broad family of products for business of all sizes. If you are not experienced in the installation of Asterisk we suggest you use one of the GUI interfaces, this will allow the administrators to view and

Read More



How to configure Linksys SPA3102

Last modified: June 3, 2015

GENERAL INFORMATION The SPA3102 is a Linksys device, similar to the PAP2/T line of devices in appearance and configuration. In addition to the similar appearance the SPA3102 also adds extra features not present in the PAP2/T such as an FXO (Foreign Exchange Office: allowing you to use a normal PSTN line or PBX line for

Read More



Linksys SPA2102 Configuration Video

Last modified: June 1, 2015

Learn how to configure The Linksys SPA2102 VoIP adapter for use with Switch2Voip accounts on your call center, business or home office. Special Notes: Proxy: sipusa.altotelecom.com (sip.altotelecom.com is no longer in use for accounts created after November 2015) Username: Your account number Password: Your password      



Symbian SIP Setup VoIP Settings Configuration

Last modified: June 1, 2015

  Make VoIP calls from your Nokia Symbian phone and save money, Switch2VoIP offers low cost calling to the USA under 1 cent per minute. You can Signup for a new account here. You can see a list of supported devices in the Nokia Website. Start by downloading the free Symbian Nokia VoIP application from

Read More



Switch2VoIP Bria Mobile VoIP Application for iPhone, iPad and Android.

Last modified: June 1, 2015

Follow this walkthrough if you need to configure Bria Mobile VoIP software for iPhone, iPad and Android powered phones.   1. Download the Bria VoIp application from the iTunes or Android website. When the installation is finished go to the Bria icon on your phone and the software will open. 2. Click on Accounts and

Read More





Categories